These sturdy weld-in engine mounts allow the installer to fine-tune the engine placement according to transmission placement or other needs. A double rubber cushion on each side provides vibration isolation at the ends of the two mounts. The rubber cushions are secured with a large 5/8” diameter bolt. The engine side mounts have holes in them so you can position the engine closer to one side of the frame.

 

The engine mount kit includes two engine side mounts, two weld-in gusseted frame mounts, and rubber mount kit.

 

Note: 713001-S is used with All GM V8’s & 4.3 V6 with a triangular / 3-bolt boss on the engine block. If using a new Gen III / IV, LS-Series V8, please see P/N 713088.

 

Note: We use the engine mounts in both:

1987-1996 Jeep Wrangler YJ

1979-1985 Toyota Truck